Shackle yog ib qho khoom siv tsis yooj yim rigging hauv nqa nqa kev ua haujlwm. Shackle tuaj yeem siv los txuas cov hlua rub thiab cov hlua ruaj ruaj. Nws yog lub teeb thiab yoog raws cov cuab yeej txuas uas tau siv dav.Shacklestuaj yeem muab faib ua hneev nti thiab U-khawms raws li lawv cov yam ntxwv zoo li. Raws li lub hom phiaj, muaj: cov saw saw, cov hlua khi, thiab cov hlua uas ntab.
(1) Cov saw hlaukhawm is a khawm used to connect the anchor chain. When in use, the horizontal bolt should be upward, and the horizontal bolt should be round to prevent it from rotating in the bolt hole and increase its strength. When using, first take out the horizontal bolt of the khawm, put the U-shaped buckle into the anchor chain ring to be connected, and then connect the horizontal bolt in series to an anchor chain ring above. In order to prevent the horizontal bolt from coming out, there is an oblique hole at each of the two ends of the horizontal bolt and the U-shaped buckle for driving the brake oblique pin. In order to prevent the oblique pin from coming out, a green lead seal should be inserted into the cavity left at the pin hole. Before the oblique pin is inserted into the pin hole, calcium-based grease should be applied to prevent rust.
(2) Thauj tog rau nkoj khawm is the khawm used to connect the anchor chain and the sinker, and the method of use is the same as the chain khawm.
(3) The floating khawm is the khawm used to connect the floating body and the anchor chain, and the method of use is the same as the chain khawm.